GREENHOUSE PLANNING / GROWING

What changes when the SwarmDep curtain closes?

Plan the crop compartment, upper space and daily transitions as part of your American Roots greenhouse.

Draw the enclosed crop compartment

SwarmDep's interior curtain forms a boundary beneath the outer greenhouse roof. The reference profile follows the interior columns and shoulders toward a flat upper section. That boundary changes which air and equipment directly serve the plants.

Use the closed profile on your American Roots layout before placing lights, fans or sensors. It gives the project team a shared drawing for both ordinary daytime use and the dark period.

Understand the change in volume

In the reference 30 × 80 ft model, whole-house volume is about 44,634 cubic feet and closed crop-zone volume is about 26,650 cubic feet. The modeled compartment is roughly 40 percent smaller. Final curtain hardware and seals affect the finished geometry.

That comparison helps explain exchange time in an American Roots configuration. The same crop remains inside, so moisture production and equipment heat must still be addressed when selecting the closed-period operating stage.

Connect openings through the crop

An upper opening primarily serves the upper space unless a deliberate path connects it to the plants below. Position the crop-zone inlet and exhaust with the curtain closed, and include light-control components wherever the route could admit unwanted light.

American Roots' lower and upper equipment positions can then be discussed as separate duties. This makes the ventilation proposal more useful than a combined fan count without a drawing of the air paths.

Keep operating equipment clear of the curtain

Lighting, crop supports and fans must coexist with the curtain's travel and stored bundle. Internal curtains can also separate heating or circulation equipment from the crop they are intended to serve. NGMA's curtain guide discusses those interactions.

Check the American Roots layout at mature crop height and with service access included. Choose equipment positions while the greenhouse configuration remains adjustable.

Plan closing and reopening together

At closure, the active air path and measurement zone may change. At reopening, upper and lower air mix again. The operating sequence should account for those transitions and the actual temperature and humidity conditions.

Specify your American Roots curtain sequence alongside the selected climate controls. During commissioning, record crop-zone readings with curtain position and active equipment so the growing team has an understandable operating reference.

Sources and model basis

Reference: NGMA curtain systems. Volumes are American Roots model examples, not measurements of an installed greenhouse. Explore the airflow calculator and SwarmDep layout.

A FEW MORE DETAILS

Your questions, answered.

Does closing blackout reduce the crop's moisture production?

The curtain reduces the modeled air compartment. The crop and wet surfaces can continue adding moisture, which the operating plan must manage.

Can a roof-space sensor control the crop accurately?

It may describe different conditions from those beneath the curtain. Use representative crop-zone measurements for the intended control task.

Why plan curtain reopening?

Reopening reconnects upper and lower air. The resulting transition should be included in the greenhouse's operating sequence.

Bring your plans to American Roots.

Choose your greenhouse and send the configuration with your location, crop and questions. We will work through the scope of your project quote with you.

Call our team: (772) 321-6305