GREENHOUSE PLANNING / CHOICES

Interior or exterior light deprivation: which fits your greenhouse?

See how curtain position changes weather exposure, growing clearance and ventilation, and where American Roots SwarmDep fits.

Choose the dark-period arrangement around the crop

A light-deprivation system controls when the crop receives darkness. An interior curtain operates beneath the greenhouse covering; an exterior system moves outside it. Position affects the mechanism, service access and the environment during closure.

American Roots SwarmDep uses an interior arrangement. Start with the crop schedule and draw the curtain in both positions, so the quoted greenhouse includes the clearance and airflow route needed through the dark period.

Shelter the moving curtain within the greenhouse

An interior curtain sits inside the weather enclosure, where the outer covering separates it from direct outdoor wind and rain exposure. The building's own covering, frame, doors and anchorage still need the design appropriate to the site.

That sheltered position is a practical reason to consider SwarmDep for an exposed location. Ask American Roots to explain curtain travel and maintenance access alongside the structural package. Exterior-system comparisons should include the specific supplier's operating wind limits and retention provisions.

Preserve a continuous air path during closure

The closed interior curtain defines a crop compartment. Intakes and exhaust must connect through that compartment if outside-air ventilation is part of the operating plan. Light-control components at the openings add resistance that belongs in fan selection.

American Roots' lower-zone layout can be discussed with the closed SwarmDep profile visible. Develop the inlet, light traps, exhaust and crop sensors together, then identify how upper-zone air will be managed separately.

Compare fabric, bundles and equipment positions

Curtain fabrics differ in their light exclusion, moisture behavior and heat-transfer properties. An open curtain also occupies storage space. The NGMA curtain guide describes how internal curtains interact with equipment and the space above them.

Use your American Roots drawing to place lights, crop supports and service routes around the actual curtain path. Confirm the selected fabric and sealing details in the equipment scope rather than transferring a performance figure from another curtain product.

Complete the dark enclosure at its edges

A blackout design includes endwalls, door seals and ventilation openings as well as overhead fabric. Inspect the entire crop compartment for unintended light paths in its operating condition. Crop darkness requirements and any required outward light containment must each be specified.

Ask American Roots to include the intended endwall and opening details with SwarmDep. This turns the curtain choice into a coordinated greenhouse configuration that can be installed and checked as a whole.

Sources and configuration planning

Reference: NGMA internal and external curtain systems. Explore crop and roof zones, airflow, and SwarmDep in the greenhouse.

A FEW MORE DETAILS

Your questions, answered.

Why consider an interior blackout system on a windy site?

The greenhouse covering shelters the moving curtain from direct outdoor exposure. The complete building still needs suitable structural design and anchorage.

Can a blackout greenhouse ventilate while the curtain is closed?

It can when the inlet, light-control components and exhaust provide a designed path through the crop compartment. Include their resistance in fan selection.

What should be compared between interior and exterior systems?

Compare operating conditions, curtain and sealing details, equipment clearance, ventilation during closure, maintenance and the complete installed scope.

Bring your plans to American Roots.

Choose your greenhouse and send the configuration with your location, crop and questions. We will work through the scope of your project quote with you.

Call our team: (772) 321-6305